Skip to top navigation
Skip to my shopping bag
Skip to main content
Skip to footer links
Backcountry Access Float E2 M/L Avalanche Airbag 35L
Our full-fledged E2 avalanche airbag pack for all snowsports.
BCA’s new Float E2 avalanche airbag packs use an Alpride E2 supercapacitor system to store energy that powers the compressor upon deployment. Supercapacitors store and release energy based on electromechanical properties rather than a chemical reaction like in rechargeable batteries. This makes supercapacitor performance much more reliable in cold temperatures. For the same reason, the energy stored in a supercapacitor releases faster when activated for deployment. The new E2 engine is 40 percent smaller and 25 percent lighter than the existing Alpride E1 system, with a 162-liter airbag. Like the E1, the E2 is TSA-approved for hassle-free airline travel. While the E2 system makes it easy to travel by air, our innovative Side Stash pocket and Back Stash zip make it easier to travel on snow-without stopping to hydrate, swap hat/gloves/eyewear, or even skins-just rip em, stash em and go! The Float E2-25 is our 25L slimmed-down airbag pack designed for all snowsports and features our waterproof coated nylon, Side Stash pocket, Back Stash zip, curved side access zip, removable ski/snowboard/compression straps, hip belt pocket, cooling fin backpanel ventilation and dedicated safety tools pocket.
Features
• Activity: Ski/Snowboarding, Snowshoe/Uphill
• Alpride E2 Supercapacitor Engine
• Side Stash Pocket
• Dedicated Shovel/Probe Compartment
• Back Stash Zip
• Curved Side Access Zip
• BC Link Radio Compatible
• Compression Straps
• A-Frame Ski Carry
• Diagonal Ski Carry
• Vertical Snowboard Carry
• Removeable Internal Compartment Divider
• Helmet Carry-Removeable
• Hip Belt Pocket(s)
• Hip Belt Tool Loop
• Dual Zippered Shoulder Straps
• Hydration Compatible
• Ice Axe Carry-External Loops
• Fleece-lined Goggle Sleeve
• Molded Cooling Fin Back Panel
• Molded Back Panel
• Internal Support Frame/Frame sheet
• Leg Strap with Storage Pocket
• Load Lifters
• Modular/Removeable/Replaceable Straps
• Moisture Drain Holes
• Multiple Mounting Options for Most snowshoes
• Zippers: Ykk Zipper with DWR Coating
• Airbag Technology: Float E2 Airbag
Materials
• PU Coated Nylon 420D Ripstop PU Coated Nylon 210D Double Ripstop Lining-100D Robic Dynatec WR Pux2
Specifications
• Volume: 30 to 35L
• Volume: 1,891cu in/31L(With E2 system), 2,136cu in/35L(Without E2 system)
• Weight: 6.1lb/2,792g(With E2 system)3.6lb/1,651g(Without E2 system)
• Torso Length: S/M: 15" - 18” / 38.1 - 45.7 cm M/L: 17” - 21” / 43.1 - 53.3 cm
Our full-fledged E2 avalanche airbag pack for all snowsports.
BCA’s new Float E2 avalanche airbag packs use an Alpride E2 supercapacitor system to store energy that powers the compressor upon deployment. Supercapacitors store and release energy based on electromechanical properties rather than a chemical reaction like in rechargeable batteries. This makes supercapacitor performance much more reliable in cold temperatures. For the same reason, the energy stored in a supercapacitor releases faster when activated for deployment. The new E2 engine is 40 percent smaller and 25 percent lighter than the existing Alpride E1 system, with a 162-liter airbag. Like the E1, the E2 is TSA-approved for hassle-free airline travel. While the E2 system makes it easy to travel by air, our innovative Side Stash pocket and Back Stash zip make it easier to travel on snow-without stopping to hydrate, swap hat/gloves/eyewear, or even skins-just rip em, stash em and go! The Float E2-25 is our 25L slimmed-down airbag pack designed for all snowsports and features our waterproof coated nylon, Side Stash pocket, Back Stash zip, curved side access zip, removable ski/snowboard/compression straps, hip belt pocket, cooling fin backpanel ventilation and dedicated safety tools pocket.
Features
• Activity: Ski/Snowboarding, Snowshoe/Uphill
• Alpride E2 Supercapacitor Engine
• Side Stash Pocket
• Dedicated Shovel/Probe Compartment
• Back Stash Zip
• Curved Side Access Zip
• BC Link Radio Compatible
• Compression Straps
• A-Frame Ski Carry
• Diagonal Ski Carry
• Vertical Snowboard Carry
• Removeable Internal Compartment Divider
• Helmet Carry-Removeable
• Hip Belt Pocket(s)
• Hip Belt Tool Loop
• Dual Zippered Shoulder Straps
• Hydration Compatible
• Ice Axe Carry-External Loops
• Fleece-lined Goggle Sleeve
• Molded Cooling Fin Back Panel
• Molded Back Panel
• Internal Support Frame/Frame sheet
• Leg Strap with Storage Pocket
• Load Lifters
• Modular/Removeable/Replaceable Straps
• Moisture Drain Holes
• Multiple Mounting Options for Most snowshoes
• Zippers: Ykk Zipper with DWR Coating
• Airbag Technology: Float E2 Airbag
Materials
• PU Coated Nylon 420D Ripstop PU Coated Nylon 210D Double Ripstop Lining-100D Robic Dynatec WR Pux2
Specifications
• Volume: 30 to 35L
• Volume: 1,891cu in/31L(With E2 system), 2,136cu in/35L(Without E2 system)
• Weight: 6.1lb/2,792g(With E2 system)3.6lb/1,651g(Without E2 system)
• Torso Length: S/M: 15" - 18” / 38.1 - 45.7 cm M/L: 17” - 21” / 43.1 - 53.3 cm